Buyback and Burn Tokens: How They Work and How to Set One Up
Last updated
Short answer: a buyback and burn token uses revenue, usually a share of trading fees, to buy its own token on the market and send those tokens to a burn address nobody controls. The buy adds demand at the moment it happens; the burn makes the supply reduction permanent, because those tokens can never be sold again. It doesn't guarantee a higher price: the effect depends on how big the buybacks are compared with selling. For memecoins, the easy way to get one is a launchpad that runs it for you, such as LFG (on Pons curves on Robinhood Chain, and on Raydium LaunchLab on Solana).
This guide explains the mechanics, the variants people confuse with it, and how to set one up honestly.
How buyback and burn works
- Revenue comes in. For a protocol that's business revenue. For a memecoin it's usually a trading tax.
- A buyback is executed. The money buys the token on its market: a bonding curve, a DEX pool or an order book.
- The tokens are burned. They go to a dead address (on EVM chains, commonly
0x000…dEaD) or are destroyed with a burn instruction (on Solana). Either way, supply goes down for good.
Two famous examples:
- BNB used quarterly buybacks and burns funded by Binance's profits, then moved to a formula-based quarterly Auto-Burn that anyone can compute in advance, plus a per-block burn of part of gas fees.
- Hyperliquid's Assistance Fund receives most of the exchange's fees and continuously buys HYPE on the market. The HYPE it holds sits at a system address, and a validator vote in December 2025 recognized it as permanently removed from supply.
Memecoins borrow the same idea at a much smaller scale: a slice of every trade's tax buys the token back and burns it.
What buyback and burn is not
These get called "buyback and burn" all the time, but they work differently:
| Mechanism | What happens to the bought tokens | Supply effect | Example |
|---|---|---|---|
| Buyback and burn | Bought on the market, sent to a burn address | Permanently lower | LFG on Robinhood Chain |
| Buyback and lock / vest | Bought, then locked and released over time | Temporarily lower, returns later | Pons V2's native buyback (vests over 5 years to creator and Pons) |
| Buyback and hold | Bought and kept in a treasury | Lower circulating, but can be sold again | Many protocol treasuries |
| Direct fee burn | No market buy; tokens collected as a fee are destroyed | Permanently lower | LFG on Solana; HYPE fees paid in HYPE |
| Auto-liquidity | Fees added to the pool's liquidity | No burn; deeper pool | SafeMoon's "auto LP" |
| "Burned" team tokens | Tokens that never circulated are sent to a dead address | Cosmetic | Common in launch announcements |
That last row deserves a warning. Burning tokens that were never going to be sold doesn't change much for holders. A real buyback and burn spends money to take tokens out of the market.
Does buyback and burn raise the price?
Honest answer: it helps, but it's not a price floor.
- The buy is what moves price. On a bonding curve or AMM pool, a buyback is just another buy: it pushes price up along the curve by an amount that depends on its size. See Bonding curves explained for the math.
- The burn is what makes it stick. Without the burn, bought tokens could come back to market later. With it, every future buyer competes for a smaller supply.
- Size relative to selling decides the outcome. If $1,000 of buybacks meets $10,000 of selling, price still falls. Buybacks reduce downward pressure. They don't cancel it.
- It's funded by traders. A memecoin's buyback money comes from the tax every trader pays. Higher tax means bigger buybacks but more expensive trades.
Think of buyback and burn as a way to recycle part of your volume into permanent supply reduction, not as a price guarantee.
Buyback and burn on LFG
LFG is a launchpad layer: your token launches on the underlying launchpad's curve, and LFG routes the trading tax into modes you choose. Buy & burn is one of them, alongside holder rewards, TopBlast (pays holders who are down the most) and a creator royalty. LFG skims 10% of collected fees to its treasury, and the other 90% is split by your weights.
Robinhood Chain (Pons V2 curves): a real market buyback
From the LFG docs:
- Your buy & burn share accumulates in a buyback vault, in the curve's quote asset (ETH or a Pons-approved ERC-20).
- LFG's keeper runs buy & burn automatically, regularly, and the trigger is permissionless, so anyone can also call it. It spends the whole vault buying your token on the market, then sends everything it bought to
0x000…dEaD. A minimum-output parameter acts as a slippage floor. - It's separate from Pons V2's own buyback flag, which LFG launches leave off. So bought tokens are burned, not vested.
- After graduation. On Robinhood Chain, buy & burn and TopBlast keep running after graduation: buy & burn then buys on the Uniswap v4 pool and burns.
Because the whole vault is spent in one buy, bigger vaults mean bigger single buys with more price impact. Triggering it more often means smaller, smoother buys.
Solana (LFG curves on Raydium LaunchLab): a direct burn of collected tax
On Solana, LFG's tax is a Token-2022 transfer fee on your mint, so the fee is withheld in your token on every transfer. Per the LFG Solana docs:
- The withheld tokens are collected, 10% goes to the treasury, and the buy & burn share is burned directly.
- There's no separate market buy. Strictly speaking, that's a fee burn, not a buyback: the tokens traders paid as tax are destroyed instead of reaching the market.
- The transfer fee stays on the mint after graduation, so burns continue from Raydium pool trades too.
- If a mode such as holder share or TopBlast is off for a token, its share is burned along with buy & burn. If no weight is active, the whole 90% is burned.
The supply effect is the same (tokens permanently gone). The difference is that a Robinhood Chain buyback adds a visible buy on the market, while a Solana burn removes tokens without one.
LFG is live on Robinhood Chain and Solana. pump.fun and Stonk integrations are planned (not live yet).
How to launch a memecoin with buyback and burn (on LFG)
- Go to lfg.cooking/launch and choose Robinhood Chain or Solana.
- Fill in name, ticker, logo, description and links.
- Pick the quote asset (fixed for life).
- Set your fee tier: up to 10% on Robinhood Chain, up to 5% on Solana.
- Give buy & burn a weight. Many creators combine it with holder rewards so holders get both supply reduction and a share of fees.
- Review and sign one transaction. On current Robinhood Chain engines, weights freeze once ownership passes to you.
Sizing it (hypothetical numbers, not a forecast)
On Robinhood Chain, with a 4% total tax split 2% buy & burn / 2% holder rewards, and 10 ETH of curve volume:
- Tax collected: 0.4 ETH. LFG's 10% skim: 0.04 ETH. Remaining: 0.36 ETH.
- Buy & burn gets half: 0.18 ETH goes into the vault and is later spent buying the token on the market and burning it.
Ask yourself whether that buy is meaningful next to typical sell sizes on your token. If not, a larger weight or a different mix may fit better.
How to check a buyback and burn is real
Whether it's your token or someone else's:
- Find the burn transactions. On Robinhood Chain, look for transfers to
0x000…dEaDfrom the engine on Blockscout. On Solana, look for burn instructions on the mint in an explorer. - Check it's on-chain logic, not a promise. "The dev will buy back weekly" is a promise. A vault that anyone can trigger is code.
- Check the destination. A "burn" to a wallet someone controls isn't a burn.
- Compare size to volume. Tiny burns on a high-tax token mean the tax is going somewhere else.
Launch with buy & burn built in
Want part of every trade to buy back and burn your token, on Pons V2 curves or Raydium LaunchLab? Launch on LFG. The mechanics are in the docs: Holder share, buy & burn and creator fees. Risks: /risk.
Not financial advice. Buybacks don't guarantee price. Last checked: Oct 18, 2026.
FAQ
- What is buyback and burn in crypto?
- A project uses revenue to buy its own token on the market and sends those tokens to a burn address, permanently reducing supply.
- Is buyback and burn good for holders?
- It can be: it adds buy pressure and reduces supply. But it's paid for by a trading tax or by revenue, and it doesn't stop price falling if selling is bigger.
- What's the difference between burning and buyback and burn?
- A plain burn destroys tokens that already exist somewhere (often team tokens or collected fees). A buyback and burn spends money to buy tokens from the market first, then destroys them.
- Which launchpads offer buyback and burn?
- LFG offers it as a built-in mode on Robinhood Chain (market buy, then burn) and Solana (burn of collected tax). Pons V2 offers a buyback that vests instead of burning. PAIR's newer launch versions on Robinhood Chain have a buyback & burn fee mode. Circuit lets pump.fun coins fund buyback and burn "rules". pump.fun doesn't burn your coin natively.
- Does buy & burn keep running after graduation?
- Yes, on both chains. On LFG's Solana launches the transfer fee stays on the mint, so burns continue from Raydium pool trades. On Robinhood Chain, buy & burn keeps running after graduation, buying on the Uniswap v4 pool and burning.
- Is buyback and burn the same as a deflationary token?
- Buyback and burn is one way to make a token deflationary. Others include burning part of every transfer or burning fees directly.